Jb-lighting DMX Controller Manual de usuario descargar pdf (Pagina 14)

DMX-Controller

1 Mains-plug 230V 50Hz bzw. 120V 60Hz (see type sign)

Fuse 160mA F

2 Type sign with explanations for tension, power, serial number

3 DMX-OUT

Pin1 Ground

Pin2 DMX -

Pin3 DMX +

5pol ? 3pol Signal

Pin1 ? Pin1 Ground

Pin2 ? Pin2 DMX-

Pin3 ? Pin3 DMX+

Pin4 free

Pin5 free

4 Music-IN

Pin1 Ground

Pin2 free

Pin3 Signal from mixer or amplifier

ATTENTION:

Do not connect high tension or amplifier-output to the music-input of the Controller.

Connection of moving-lights

The DMX-Controller is suitable for 12 moving-lights which must be have 6 Channels with the following channel

configuration:

Channel 1 X / PAN

Channel 2 Y / TILT

Channel 3 GOBO

Channel 4 FARBE

Channel 5 SHUTTER / DIMMER

Channel 6 IRIS

The DMX-address of the Scanner follows the binar-figure-system and ensues in 6 (channel-) steps:

moving-light no. 1: DMX-address "1"

moving-light no. 2: DMX-address "7"

moving-light no. 3: DMX-address "13"

1 2 ... 9 10 11 12 13 14 15 16 17 18

Sin comentarios

Jb-lighting DMX Controller Manual de usuario Pagina 14